GL220 Technical Specifications Download
GL220
Quick Start Guide (2.9 MB) Download
GL220 Users Manual (14.9 MB) Download
GL220 Software Users Manual (7.2 MB) Download
GL220 Application Software Download
The multifunction GL220
data logger accepts inputs form voltage, temperature,
current* 4-20mA, humidity, pulse and logic signals. This
allows combined measurements,
even for disparate phenomena such as temperature/humidity
and voltage.
*External shunt resistor required.
With an isolated input system the
GL220 ensures that cross channel interference is
minimised and this eliminates the need to pay special
attention to wiring which allow users to speed up their data logging tasks.
User –friendly
design
The GL220 incorporates
feature such as the ability to set measurement
parameters
for each item separately and navigation assistance
to provide superior operability. The device
case features stylish non-slip rubber
Built-in flash memory for reliable
measurements
The flash memory used for the built-in
memory device ensures that data is retained even
if the power supply is interrupted. This means
momentary disruptions in the AC power supply or
accidentally switching off power will not result
in data loss even while data logging.
Accepts USB memory devices
Commercially available USB memory
devices may be used for direct capture of data or
to transfer
data
to
a PC. With a 1GB
USB memory device, users can capture data for
365+
days*. In
addition, the GL220 can be connect directly
to a PC via the USB cable which turns the GL220 into a data acquisition unit with ability to log data directly to the computer.
* 10 channels, 1-s sampling rate.
Vivid 10.9cm
(4.3") TFT colour LCD
The bright, easy-to-read 4.3-inch
TFT colour LCD monitor(WQVGA: 480 x 272 dots) makes it even easier
to review
measurement parameter settings, measured
waveforms, and digital values. All
the GL220's functions can be accessed through
the navigation cluster and LCD screen. Single
touch buttons for such tasks as display mode,
setup and logging start/stop negate the need
for complicated menu trees.
6 hours of continuous battery
operations
A convenient optional battery pack
is available for use in areas where AC power
is unavailable
or subject to interruption. The battery pack
enables 6 hours* of continuous measurement
and provides
a remaining battery capacity display function. * Varies with measurement conditions.
Free
Bundled PC software
The GL220 data logger is bundled with PC
application software that enables measurements
directly with a PC. In addition to waveform
monitoring, this software provides other
useful functions
such as direct writing of data to an Excel
file and report creation. The software
also provides a Help display function for
enhanced
usability.
Software Features
- Configuration and channel setup
via USB * Real time data storage to hard disk.
- Stored
data import from GL220.
- Email notification
of errors and alarms.
- Available measurement
modes: Y-T, X-Y, and FFT.
- Separate screens
are available for each of the settings.
- Direct
Excel transfer can be enabled as a report
function.
GL220 Main Features
- Inputs: Voltage (20mv to 50V),
Thermocouples (K,E,J,T,N,R,S,T,B,W) and 4-20mA
signals via external shunt resistor. Optional Graphtec
Humidity sensor is available.
- One pulse input and one trigger input.
- 16-bit ADC resolution.
- 10.9cm (4.3") colour LCD
display (WQVGA: 480 x 272 dots).
- Waveform and text display modes.
- Easy-to-use keypad
menu system.
- Single open-collector alarm output.
- Range of trigger
functions.
- Real-time statistical calculation.
- Built-in 2GB flash
memory.
- 2 x USB 2.0 interfaces - one
for USB Memory stick and one for PC connection.
- Built-in battery
for up to 6 hour operation.
- Scan speed - Maximum.
- 10 milli Seconds for 1 channel.
- 20 milli Seconds for 2 channels.
- 50 milli Seconds for 5 channels.
- 100 milli Second for 6-10 channels.
- Ultra small
(194 x 117 x 42 mm).
The GL220 includes the following:
- GL220 Quick Start
Guide.
- GL220-APS Software.
- Power Supply - 24Volts DC.
- USB Cable
